Vehicle & Off-Highway Machinery Control Systems (M-Series)
DSEM840 MKI
4.3" Programmable Display
Release Notes
M-Series Release Notes
English
M-Series Release Notes.
Information on firmware, device descriptors, packages and CODESYS.
Version 48: 25/11/2024
Information on firmware, device descriptors, packages and CODESYS.
Version 48: 25/11/2024
Software Downloads
DSE Codesys Package
1.5.31
Install CODESYS before installing this package.
Supported targets:
M640 V1.0
M640 V2.0
M640 V3.0
M643 V1.0
M643 V2.0
M643 V3.0
M835 V1.0
M835 V1.1
M840-01 V3.1
M840-02 V4.1
M870-01 V6.0
M870-02 V6.0
M870-03 V6.0
M871-01 V5.0
M810 V1.0
M812 V1.0
M812 V1.1
M812 V2.0
Included libraries:
DSE CAN V1.7
DSE Utils V2.2
DSE J1939 V1.2
DSE Keypads V1.1
Note older versions are contained within the package, see release notes
- 23.10.2024
- English
- CODESYS 3.5
CODESYS 3.5 SP12
3.5 SP 12
The
IEC 61131-3 programming tool CODESYS Development System.
- User-friendly programming tool.
- Allows the user to program compatible DSEControl® products.
- Fully programmable via IEC 61131-3 Languages (FBD, LD, IL, ST, SFC).
- (For DSEM640, DSEM643, DSEM835, DSEM840, DSEM870 V1 to V5, DSEM812 V1. After Installation, download and install the DSE CODESYS Package)
- For DSEM812 V2.0 or DSEM870 V6, use CODESYS 3.5.17.60 instead.
- 08.05.2018
- English
- Windows 7, Windows 8.1 and Windows 10 (32/64 Bit)
DSEServiceTool
1.52.3
Software
tool for DSEControl M-Series products.
- Allows the user to upgrade the firmware and bootloader of supported devices.
- Allows the user to download new CODESYS ‘boot applications’.
- Supports Ethernet connection (DSEM640, DSEM643, DSEM840, DSEM870, DSEM871, DSEM810, DSEM812)
- Supports CAN connection (DSEM640 V2+, DSEM643 V2+, DSEM835, DSEM240)
- 20.11.2024
- English
- Windows 7, 8.1, 10 (32- and 64-bit)
Module Firmware
DSE M840 Firmware Upgrade File
3.1.11
Users requiring to update V1 devices are referred to DSE Technical Support (support@deepseaelectronics.com) for further advice.
Change Notes:
- Shutdown changes to stop occasional reset during ignition off
- Task Intervals limited to 5ms minimum
- 08.04.2020
- English
- DSEM840-01
Training Documents
Use of the CurrentVisu variable to change Visu page.
English
Training Document showing one method to change shown Visualisation page (CurrentVisu variable) using DSEMSeries displays.
Localisation of CODESYS projects
English
Shows how to use CODESYS text boxes to achieve localisation of the project.
Using CODESYS Unit Conversion
English
Shows how to use CODESYS UnitConversioon to convert values from one type to another (Celcius to Farenheit, kpA to PSI etc)
Application and Device Versions
English
Describes options should the device and project versions differ.
Font Use in CODESYS and DSEMSeries devices
English
Describes font use within CODESYS and DSEMSeries Devices.
Data Conversion in CODESYS (CAN, MODBUS etc)
English
Data Conversion in CODESYS (CAN, MODBUS etc)
DSE MSeries (CODESYS) and MODBUS TCP
English
Describes compatibility and setup of DSE MSeries devices (CODESYS Variants) with MODBUS TCP.
DSE_CAN Compiled Library Usage Guide and Examples
English
This zip file contains DSE Document 057-336 DSE_CAN Compiled Library Usage Guide, along with example project files showing use of DSE_CAN Compiled Library.
The library itself is contained within DSE CODESYS Package.
The library itself is contained within DSE CODESYS Package.
Using CURRENTVISU to display visualisations in CODESYS
English
Describes how the CURRENTVISU variable is used to control the display of visualisations within CODESYS. This is most commonly used to handle 'page control' in a system containing multiple display pages (visualisations)
System LED CODESYS
English
Training Document describing how to drive the System LED fitted to the M640, M643, M840 and M870.
Persistent Variables CODESYS
English
Document describing the use of PERSISTENT and RETAIN variables on the M Series devices.
