Expansion Modules
c
DSE2160
DSENet® Input / Output Expansion Module
The DSE2160 DSENet® Input / Output Expansion Module has been developed for use with the DSEG8600 and DSEM-Series platforms. The DSE2160 extends the host modules input and output capabilities for increased application flexibility. This is achieved by providing an additional 8 inputs, consisting of 2 analogue inputs (both can be configured as digital) and 6 digital inputs (digital input A can be configured as a frequency input, pulse counter or RPM input). The DSE2160 also provides 8 additional digital outputs. All 8 outputs can be individually configured as a digital input, positive switching DC output or a negative switch DC output.
For enchanced communication with the host module, the DSE2160 features a DSENet® port for connection to the DSEG8600 platform and a CAN port for connection to the DSEM-Series platform. A red status LED is provided to easily identify when the DSE2160 is connected to a power source and communicating with the host controller.
DIMENSIONS (W x H x D)
120 mm x 75 mm x 31.5 mm / 4.72” x 2.95” x 1.24”
120 mm x 75 mm x 31.5 mm / 4.72” x 2.95” x 1.24”
Request a Quote
Product Highlights
Key Features
2 analogue inputs (configurable as digital inputs)
6 digital inputs
8 digital inputs / outputs (configurable as digital inputs, positive switching DC output and negative switching DC output)
Status LED to indicate Power On and Link Lost
DSENet® Communication
CAN Communication
Specification
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 DC Continuous
CRANKING DROPOUTS
Survives 0 V for 50 ms, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs are not maintained during cranking.
MAXIMUM OPERATING CURRENT
190 mA at 12 V, 90 mA at 24 V
MAXIMUM STANDBY CURRENT
34 mA at 12 V, 20 mA at 24 V
DIMENSIONS (W x H x D)
120 mm x 75 mm x 31.5 mm / 4.72” x 2.95” x 1.24”
8 V to 35 DC Continuous
CRANKING DROPOUTS
Survives 0 V for 50 ms, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs are not maintained during cranking.
MAXIMUM OPERATING CURRENT
190 mA at 12 V, 90 mA at 24 V
MAXIMUM STANDBY CURRENT
34 mA at 12 V, 20 mA at 24 V
DIMENSIONS (W x H x D)
120 mm x 75 mm x 31.5 mm / 4.72” x 2.95” x 1.24”
Environmental Testing Standards
Electro-Magnetic Compatibility
BS EN 61000-6-2 - EMC Generic Immunity Standard for the Industrial Environment
BS EN 61000-6-4 - EMC Generic Emission Standard for the Industrial Environment
Electrical Safety
BS EN 61010 - Safety of Information Technology Equipment, including Electrical Business Equipment
Temperature
BS EN 60068-2-1 - Ab/Ae Cold Test -30°C
BS EN 60068-2-2 - Bb/Be Dry Heat +70°C
Vibration
BS EN 60068-2-6 - Ten sweeps in each of three major axes
5Hz to 8 Hz at +/-7.5mm
8Hz to 500 Hz at 2gn
BS EN 61000-6-2 - EMC Generic Immunity Standard for the Industrial Environment
BS EN 61000-6-4 - EMC Generic Emission Standard for the Industrial Environment
Electrical Safety
BS EN 61010 - Safety of Information Technology Equipment, including Electrical Business Equipment
Temperature
BS EN 60068-2-1 - Ab/Ae Cold Test -30°C
BS EN 60068-2-2 - Bb/Be Dry Heat +70°C
Vibration
BS EN 60068-2-6 - Ten sweeps in each of three major axes
5Hz to 8 Hz at +/-7.5mm
8Hz to 500 Hz at 2gn
Humidity
BS EN 60068-2-30 - Db Damp Heat Cyclic 20/55°C at 95% RH 48 Hours
BS EN 60068-2-78 - Cab Damp Heat Static 40°C at 93% RH 48 Hours
Shock
BS EN 60068-2-27 - Three shocks in each of three major axes
15 gn in 11 ms
Degrees of Protection Provided by Enclosures
BS EN 60529 - IP21 - Front of module when installed into the control panel.
BS EN 60068-2-30 - Db Damp Heat Cyclic 20/55°C at 95% RH 48 Hours
BS EN 60068-2-78 - Cab Damp Heat Static 40°C at 93% RH 48 Hours
Shock
BS EN 60068-2-27 - Three shocks in each of three major axes
15 gn in 11 ms
Degrees of Protection Provided by Enclosures
BS EN 60529 - IP21 - Front of module when installed into the control panel.
