Expansion Modules
c
DSE2170
DSENet® RTD / Thermocouple Input & Analogue Output Expansion Module
The DSE2170 RTD/Thermocouple Input and Analogue Output Expansion Module has been developed for use with the DSEG8600 platform and DSEM-Series platform. The DSE2170 extends the host modules input and output capabilities for increased application flexibility. This is achieved by providing an additional 4 RTD/thermocouple inputs (configurable as J Type, K Type, L Type, Pt100 or Pt1000) and 4 analogue outputs (configurable as 0 V to 10 V or 0 mA to 20 mA).
For enhanced communication with the host module, the DSE2170 features a DSENet® port for connection to the DSEG8600 platform and a CAN port for connection to the DSEM-Series platform. A red status LED is provided to easily identify when the DSE2170 is connected to a power source and communicating with the host controller.
DIMENSIONS (W x H x D)
120 mm x 75 mm x 31.5 mm (4.72” x 2.95” x 1.24”)
120 mm x 75 mm x 31.5 mm (4.72” x 2.95” x 1.24”)
Request a Quote
Product Highlights
Key Features
4 RTD/Thermocouple Inputs
4 Analogue Outputs
Status LED to indicate Power On and Link Lost
DSENet® Communication
CAN Communication
Specification
SPECIFICATIONS
DC SUPPLY CONTINUOUS VOLTAGE RATING8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 ms, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs are not maintained during cranking.
MAXIMUM OPERATING CURRENT
200 mA at 12 V, 95 mA at 24 V
MAXIMUM STANDBY CURRENT
50 mA (no communication active)
DIMENSIONS (W x H x D)
120 mm x 75 mm x 31.5 mm (4.72” x 2.95” x 1.24”)
Environmental Testing Standards
Electro-Magnetic Compatibility
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment
Electrical Safety
BS EN 61010
Safety of Information Technology Equipment, including Electrical Business Equipment
Temperature
BS EN 60068-2-1
Ab/Ae Cold Test -30°C
BS EN 60068-2-2
Bb/Be Dry Heat +70°C
Vibration
BS EN 60068-2-6
Ten sweeps in each of three major axes
5Hz to 8 Hz at ±7.5mm
8Hz to 500 Hz at 2Gn
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment
Electrical Safety
BS EN 61010
Safety of Information Technology Equipment, including Electrical Business Equipment
Temperature
BS EN 60068-2-1
Ab/Ae Cold Test -30°C
BS EN 60068-2-2
Bb/Be Dry Heat +70°C
Vibration
BS EN 60068-2-6
Ten sweeps in each of three major axes
5Hz to 8 Hz at ±7.5mm
8Hz to 500 Hz at 2Gn
Humidity
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55°C at 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40°C at 93% RH 48 Hours
Shock
BS EN 60068-2-27
Three shocks in each of three major axes
15 Gn in 11 ms
Degrees of Protection Provided by Enclosures
BS EN 60529
IP21
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55°C at 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40°C at 93% RH 48 Hours
Shock
BS EN 60068-2-27
Three shocks in each of three major axes
15 Gn in 11 ms
Degrees of Protection Provided by Enclosures
BS EN 60529
IP21
